Testing Methods

1、Position the washing machine in place.

2、Manually connect the water inlet pipe, drain pipe and power cord, and place the simulated load.

3、Manually scan the product barcode and MAC code.

4、The PC controls the washing machine to power on (the washing machine starts automatically).

5、The PC searches for the washing machine's wireless hotspot, connects automatically, and reads the internal information of the washing machine (such as version number).

6、The PC sends instructions via Wi-Fi in the set order to control the washing machine to start the corresponding program.

7、The PC controls the solenoid valve to open for water injection into the washing machine and detects the flow rate.

8、Perform the low-start test.

9、Spray test: The PC controls the washing machine to turn on each spray point one by one and detects the flow rate.

10、Drum test: The PC controls the drum to start, reads the rotational speed, and detects the power.

11、Drainage test: The PC controls the drainage function to start and detects the flow rate.

12、The PC controls the switch to normal pressure.

13、The PC controls the start of spin-drying and drying tests, and detects the power.

14、After the test is completed, manually disconnect the water inlet pipe, drain pipe and power cord, and take out the simulated load.

Detection Process

Multiple integrated automatic testing stations are placed on-site to automatically detect various indicators in accordance with preset procedures.

Testing Stations: Capable of detecting all electrical performance test items of washing machines, including water inlet and drainage, washing performance, dehydration performance, heating, automatic dosing, sensors, rotational speed and other performance items. It is equivalent to four inspection stations. Items not detectable: noise, water leakage, display effect, and keys.

Detection Station Design

Technical Logic

Test Station Interactive Information

Instruments on the Testing Equipment:

1.Voltmeter

2.Inlet Water Flow Meter

3.Power Meter

4.Water Thermometer

5.Automatic Barcode Scanner

6.Water Inlet and Drainage Fixture

7.Inspection Program and Database for Various Models

The equipment reads all data from the washing machine mainboard via the Wi-Fi port.

Data of the Washing Machine Mainboard:

1.Water Temperature

2.Preset Set Value for Washing Machine Model

3.Water Level Sensor Frequency

4.Inner Drum Rotational Speed

5.Eccentricity Value

6.Internal Program Operation Signal

7.Software Version Number, etc.

Test Results

1、Wi-Fi Test Results: MAC address bound to product barcode; Wi-Fi signal strength

2、Safety Inspection Results

3、Power Curve: Automatically judged according to the preset model

4、Flow Curve: Automatically judged according to the preset model

5、Rotational Speed Curve: Automatically judged according to the preset model

6、Error Prevention for Washing Machine Main Control Board Information

Detection Model

Administrators can customize detection templates for selection and use by various models, and select, arrange, and combine them according to actual detection requirements.

Detection Model Sharing

All test stations are connected to the same server, and detection models can be uniformly maintained by administrators in the office. Factories can share these detection models through the cloud server.